Every feature

Every Aqueduct feature, one problem at a time.

Each feature is written the same way: the problem, then the flywheel that resolves it, then what powers it. Outcomes lead, and modules appear only as powered by.

Book a demo See how it works

Panel meters showing frequency, voltage and current

Water balance · live

42.6Supply=36.1Floors+4.2RO+2.3Loss

Unaccounted loss rising on line CW-4

Demo data

AHU-1 · fault

Supply fan stopped08:02

Failed rotor shaft08:03

Routed to CMMS08:04

Airflow confirmed11:40

Demo data

Water intelligence

Leak detectionLeaks found from the balance, not the bill. Localized to the node, priced per month, ticket routed.Non-revenue waterMetered supply against billed and metered use. Loss with an address.Burst detectionNight-flow and rate-of-change analysis flags a burst in minutes, then isolates on approval.

Sub-metering

Water quality monitoring

Reuse and recharge tracking

Cooling tower make-up

Water bill validation

Network loss reduction

Energy efficiency

Weather-normalized baseliningRegression on usage plus cooling and heating degree days. The expectation before the claim.Measurement and verification (M&V)The Verify step as a named capability. Savings confirmed at the meter, evidence retained.Peak demand managementSee the peak coming. Pre-cool, stagger, shed, with every command logged.Load disaggregationWhole-site load split by asset and circuit, so waste has a name.

Power quality

Energy bill validation

Tenant sub-billing

Tariff analytics

Setpoint optimization

Portfolio benchmarking

Healthy air

Indoor air quality monitoringCO2, VOC, CO, temperature and humidity per zone, continuously.CO2 monitoringZone targets with ventilation response. Occupied hours only, if you choose.PM2.5 and PM10 monitoringThe real curve during operations, not a weekend reading.VOC monitoringNightly patterns, cleaning cycles and off-gassing seen and traced.

Demand-controlled ventilation

Ventilation boost and control

Thermal comfort

Certification evidence

Facility operations

Fault detection and diagnostics (FDD)Faults found, diagnosed and fixed. Root cause in plain language, ticket routed with the fix.Predictive maintenanceVibration, sound and energy drift caught before the fault, so the disruption never happens.Asset observabilityEvery asset, its state and health: running, drifting, stopped, silent.Digital twinSites, floors, zones, devices and equipment in one live model. aQ Atria context and 3D views.

CMMS integration

BMS and BAS integration

SCADA integration

AMI and historian integration

Alerts and routing

Auditable command history

aQ Assistant

ESG and certification metrics

Carbon accounting inputs

Portfolio analytics

Questions

Common questions

Aqueduct groups its features by outcome. Water covers leak detection, burst detection and non-revenue water. Energy covers weather-normalized baselining, measurement and verification, peak demand and load disaggregation. Air covers CO2, VOC and comfort per zone. Operations covers fault detection and diagnostics, predictive maintenance and asset observability.

No. Every feature reads from the same data layer, aQ Core, so a site can start with one outcome, such as water loss or HVAC energy, and add the others later. Adding a feature uses the meters and points already connected, with no new integration project.

Fault detection, leak detection and air quality features act by routing a ticket with a recommended fix into your CMMS. Smart Controls changes setpoints and schedules where control is enabled, with owner approval. Measurement and verification reports the result against the baseline, so every action has a measured outcome.

Aqueduct compares metered use with a weather-normalized baseline built from the site's own history and degree days, following IPMVP Option C and the regression approach in ASHRAE Guideline 14. Rate configuration turns the gap into money, so a saving is measured rather than estimated.

See Aqueduct on your own facility.

Bring a site, a utility bill or a question. We will show you where the loss is.

Book a demo Talk to our team

Every Aqueduct feature, one problem at a time.

Water intelligence

Energy efficiency

Healthy air

Facility operations

Common questions

What features does Aqueduct include?

Do I need to buy every Aqueduct feature?

Which Aqueduct features act, and which only report?

How does Aqueduct prove a feature saved money?

See Aqueduct on your own facility.