Hardware brands Aqueduct works with
Aqueduct works with meters, sensors, gateways and controllers from Milesight, MultiTech, Synetica, Elsys and other LoRaWAN and metering manufacturers. The model is chosen for each site by what it must measure, its protocol and site conditions.
Hardware matched to your site, your applications and how you operate, not a one-size-fits-all kit.
How mixed fleets read as one system
- Model decoders
Each model's messages are decoded into readings in consistent units.
- Mapped to assets
Every device is tied to the meter, zone or unit it measures.
- Free to switch
A brand can change later without rebuilding twins or history.
How a make and model is chosen
Outcome
Decide what must be measured or controlled, such as a water balance or RTU control.
Existing devices
Connect meters and BMS points that already report.
Fit
Match pipe size, panel, protocol, radio coverage and local approvals.
Install
Partners fit and commission the device, then Aqueduct checks its health.
Device agnostic, with leading manufacturers.
Exact make and model are selected per site. These are some of the manufacturers and standards Aqueduct works with.
sites in 21 countries run on Aqueduct.
and 9 clinics in one of India’s top hospital chains.
US airport running water intelligence on Aqueduct.
of commercial real estate under Aqueduct.
FMCG manufacturing campus.
operations run on Aqueduct.
Related
Common questions
Usually. Any device that emits telemetry over an open protocol can be onboarded once a decoder for its messages is built and tested. Your existing fleet is reviewed in the site survey. See hardware partners.
Through the hardware partner track. It covers payload decoding, a field test on a live site and inclusion in site specifications where the device fits, after a review of its data points, protocol and markets. See the partner program.
Yes. Readings are mapped to the meter, zone or unit, not the device, so a brand can change without rebuilding twins or losing history. The new device simply continues the same record. See asset observability.
LoRaWAN, BACnet, Modbus, M-Bus, MQTT or a pulse output, with direct access to the data. Closed devices that only report to a vendor cloud are harder to onboard. See gateways.
See Aqueduct on your own facility.
Bring a site, a utility bill or a question. We will show you where the loss is.