Row of stainless silos
Distilleries and breweries

Distilleries where every liter in is accounted for on the way out.

Mashing, distillation, condensing and cleaning make water and steam part of the product. Aqueduct meters every flow, closes the water and thermal balance, and keeps the zero liquid discharge record continuous.

Water balance · live
42.6Supply=36.1Floors+4.2RO+2.3Loss
Unaccounted loss rising on line CW-4
Demo data
Bill validation · September
Supplier billed184.2 MWh
Metered176.9 MWh
Difference7.3 MWh
Demo data
Problems by outcome

What distilleries and breweries teams are up against.

Water, energy, air and operations carry equal weight. Each one runs the same loop: monitor, measure, identify, act, verify.

01

Water: Condensers and cooling towers

Clean water to drain from low tower cycles

02

Energy: Stills and the boiler house

Lost condensate, so fuel is burned twice

03

Air: Spent wash evaporation

Evaporators running on steam the plant wasted

04

Operations: Cleaning cycles

Vessels cleaned on a timer, batch or no batch

Problem, solution, impact

Problem, solution, impact.

How Aqueduct resolves each problem for distilleries and breweries, and what changes when it does.

The problemHow Aqueduct solves itThe impact
Water

Clean water to drain from low tower cycles

A live water balance across meters and sub-meters localizes the loss, routes the fix and confirms it closed at the meter.

Loss found from the balance, not the bill, and every fix verified.

Energy

Lost condensate, so fuel is burned twice

Weather-normalized baselines per building and asset show the waste in money; schedules and setpoints adjust where control is enabled.

Savings stated in money and confirmed at the meter, not estimated.

Air

Evaporators running on steam the plant wasted

Air quality per zone, overlaid with occupancy, with ventilation raised when it matters and verified back in range.

Targets held during occupied hours, with the energy cost counted.

Operations

Vessels cleaned on a timer, batch or no batch

Faults diagnosed in plain language and routed into your CMMS with the fix; early signs of failure schedule maintenance first.

Fewer reactive call-outs and closures confirmed by the equipment.

One incident, start to finish

One incident, from first signal to verified fix.

An illustrative example of the flywheel on a typical site.

Monitor

Each stage metered, from mash tun to evaporator.

Measure

A balance per batch and line.

Identify

Still house condensate return falling for a week.

Act

Ticket naming the trap bank and the loss.

Verify

Return ratio restored. Fuel and make-up saving priced.

Connected products

Four connected products on one data layer.

aQ WaterGuard

Find every leak and loss, fix it, prove it. Powered by aQ Core.

Learn more

aQ EnergySmart

Cut waste and peak demand, feeder by feeder. Powered by aQ Core.

Learn more

aQ AirSafe

Hit air targets without burning energy. Powered by aQ Core.

Learn more

aQ PredictIQ

Faults fixed, failures prevented. Powered by aQ Core.

Learn more
Replace or integrate

Replace what should be replaced. Connect the rest.

Replaces or works with your
  • Utility monitoring
  • EMS
  • Leak and balance tools
Integrates with your
  • CMMS
  • Plant SCADA and historians, read only
  • ERP for cost allocation

Three equal ways in: keep your BMS, replace it, or build Aqueduct in at design stage.

Who it is for

The questions each seat asks first.

Plant head
“Where is the water and steam going, batch by batch?”
EHS manager
“Can I show the board the ZLD balance closes?”
Utilities engineer
“Is the condensate coming back?”
Standards and regulations

Standards and regulations we supply evidence for.

We supply the measured inputs. You run the program and file the report.

CPCB and SPCB ZLD conditionsBRSR CoreCCTSISO 14001 ISO 50001 ISO 46001
By the numbers

Where the spirit’s water and steam go.

6.48 KL

of spent wash per KL of alcohol at Ganga basin molasses distilleries in 2021 to 22, from 11.1 KL in 2016 to 17.

Source: Indian Forester
22%

gain in Scotch whisky water use efficiency reported in 2021.

Source: Scotch Whisky Association
15 to 30%

of steam traps may fail in systems left unmaintained for 3 to 5 years.

Source: US DOE Steam Tip Sheet
Where this is going

Targets that need a closed balance.

1
2025

Responsible water use range

Scotch producers aimed to bring every site inside a responsible range by 2025, with net zero for own operations by 2040.

2
Since 2017

ZLD under the CPCB charter

Ganga basin molasses distilleries reached zero liquid discharge. Keeping it means a balance that closes every day.

Proof

Proven in live sites across sectors.

Anonymized results from live sites.

Deployed
275+

sites in 21 countries run on Aqueduct.

Healthcare
22 hospitals

and 9 clinics in one of India’s top hospital chains.

Airports
A top 25

US airport running water intelligence on Aqueduct.

Real estate
20M+ sq ft

of commercial real estate under Aqueduct.

Customer names withheld. Every result is anonymized.
Questions

Common questions

Every liter of condensate not returned to the boiler is replaced with treated make-up water and heated from cold. One ratio therefore carries both a water loss and a fuel loss, so Aqueduct tracks it next to steam flow and boiler fuel use.

Yes. A brewery runs the same utilities in a different order: hot liquor, wort cooling, cleaning and packaging. Aqueduct measures water, steam and power at each of those steps, so a loss shows up against the step that caused it rather than in one site total.

Yes, by supplying the measured volumes. Aqueduct meters effluent and spent wash flows next to production, so volume per unit of spirit can be tracked month by month. The distillery still prepares and files its own returns to the regulator.

See Aqueduct on your own facility.

Bring a site, a utility bill or a question. We will show you where the loss is.