Hardware. Software. AI. Live data.
We are how buildings stop losing water at 02:00
Aqueduct turns water, energy, air, and asset data into answers you can act on today. Ask aQ Assistant in plain language, get the number, the cause, and the next step. Live in 2 to 6 weeks.
200+ installations across 19 countries
200+
Installations
Across 19 countries
2 to 6
Weeks to live data
Not 6 to 12 months
<12
Month payback
Typical ROI timeline
15 to 30%
Utility savings
Energy and water combined
The gap
Your buildings already produce the data. You just cannot reach it.
Meters, chillers, BMS, HVAC, submeters, and utility bills all hold part of the picture. None of them share it. So leaks run for weeks, energy drifts quietly upward, air quality goes unmeasured, and the sustainability report gets built by hand from spreadsheets that are already out of date.
Data in silos
Every system speaks its own protocol, and none of them reconcile. You get reports, not answers.
Reactive by default
You find the leak when the bill arrives or the ceiling stains. By then the loss is already booked.
Too many vendors
A sensor vendor, an integrator, a software vendor, and a consultant. Four contracts, nobody accountable for the outcome.
The complete smart building platform
Aqueduct: one platform for every building
Hardware, software, and AI unified. Real-time monitoring, intelligent analytics, and automated control across water, energy, air, and assets.
aQ Core
The system of record for facilities data. Any device, any protocol, normalized and given context, with device health monitoring built in.
Metering and telemetry as a platform
aQ WaterGuard
Continuous water monitoring for leak detection and consumption optimization.
Up to 50% water loss reduction
aQ EnergySmart
Energy efficiency through continuous optimization and performance accountability.
Up to 30% energy bill reduction
aQ AirSafe
Indoor air quality management with health thresholds and auditable compliance.
Measurable productivity and comfort gains
aQ Atria
Installation and commissioning by Milvian crews: sensor selection, gateway design, validation, and go-live support.
The part most platforms leave to you
Intelligence layer
The anatomy of one answer
aQ Assistant is included on every Aqueduct deployment, on web and mobile. Every answer arrives in four parts, and every part is traceable.
"Which sites are over water budget this month, and what is driving it?"
01 / THE NUMBER
Three sites, up 22%
The figure first, portfolio wide, against budget and occupancy, not a chart you have to read.
02 / THE CAUSE
Cooling tower, 02:00
Traced to the meter, the asset, and the hour it started. A stuck float valve, not demand.
03 / THE EVIDENCE
14 readings attached
Every figure links back to the raw reading and timestamp behind it. No black box.
04 / THE NEXT STEP
Work order drafted
Work orders, alerts, escalations, and board reporting raised straight out of the answer.
aQ Assistant
Stop reading dashboards. Start asking questions.
Click a question. aQ Assistant reads the meters, answers in plain language, attaches the evidence, and offers the next step.
Inside the platform
This is the product, not a concept render
Live screens from Aqueduct. Pick a view to see how water and energy data actually arrive.
Your equipment, your choice
No rip and replace. No vendor lock-in.
Aqueduct sits on top of the systems you already run and fills the gaps they leave. Keep your BMS. Keep your meters. Add sensors where you have blind spots. Your data stays yours, in open formats, on your terms.
Case study
Water Positive 2030, across 88+ sites
A Fortune 1 enterprise needed site-level water performance it could audit, not estimate. Milvian provides the metering backbone and the reporting layer.
THE CHALLENGE
Water data sat in utility bills and disconnected meters. Losses surfaced weeks later, and site-level reporting was rebuilt by hand every quarter.
WHAT WE DID
Instrumented the sites, normalized every meter into aQ Core, and set minimum-flow leak detection with alerting in hours rather than billing cycles.
THE RESULT
75,000 m³ of water saved in the first seven months, with every reported figure traceable to the meter it came from.
75,000
m³ water saved
88+
Sites under program
7
Months to that result
"Our team has a strategic partnership with Milvian to deploy IoT solutions that measure and reduce water usage at sites globally."
Worldwide Sustainability Lead, Water Positive program
Deep dive into full case studyFrom data to action in three steps
Assess and design. We map the buildings and design the sensor and integration strategy. Output: roadmap and projected ROI.
Connect and monitor. Sensors and systems come online, whatever the protocol. Output: live visibility in 2 to 6 weeks.
Analyze and act. Dashboards, alerts, recommendations, automated control. Output: measurable savings.
Industries
Built for the way your sites actually run
Hospital operations
Air quality compliance and utility uptime where failure is not an option
Commercial real estate
Portfolio-wide visibility and NOI protection across every asset
Manufacturing
Utility intelligence tied to production, not just to the meter
Stadium intelligence
Peak-load and peak-crowd control on event days
Shopping malls
Common-area cost control and tenant-level submetering
Dairy processing
Water and energy intensity per litre processed
Dairy farms
Continuous water monitoring across dispersed sites
Distillery
Process water accountability and utility efficiency
Facility services
White-label building intelligence for your client portfolio
Construction
Commissioning data from day one, not after handover
Design and architecture
Performance data that closes the design-to-operation loop
All industries
See every vertical we deploy in
Why Milvian
Milvian, next to the usual way
Six decisions that separate a platform that works in your buildings from a pilot that stalls.
Outcome-focused
Success measured by your results: waste reduced, costs cut, reliability improved.
Licences sold by seat, outcomes left to you.
No vendor lock-in
Hardware-agnostic. Your choice of sensors, your data, open formats.
Proprietary hardware ecosystems you cannot leave.
Speed to value
2 to 6 weeks from first call to live data.
6 to 12 month integration projects.
One platform
Water, energy, air, and assets on one data model. One invoice.
Four contracts, nobody accountable.
Global scale
200+ installations across 19 countries, with market-compliant hardware.
Regional players with limited reach.
Proven ROI
Typical payback under 12 months, and we will show you the math.
Complex licensing with hidden costs.
Enterprise-grade security
Built for the enterprise
Programs and channels
Member of the NVIDIA Inception Program. Aqueduct is available on AWS Marketplace for direct purchase.
Ready to see Aqueduct in your buildings?
Book a walkthrough against your own portfolio. We will show you what we would instrument first and what it should pay back.
Request a demoPrefer to buy direct? Aqueduct is available on AWS Marketplace.
Global end-to-end smart building platform. AWS Advanced Tier Service Partner.
© 2026 Milvian. All rights reserved.